| Home | Terms of Use | Site Map | Contact Us |
IndustryCommunity.com > Electrical and Electronic Community > X-ray Generation Forum > Message
Main Menu

[ List Subjects ][ Post Message ]
[ View Followups ][ Post Followup ]

Subject: A 150KV metal-ceramic X-ray tube required

Date: 04/28/03 at 9:22 AM
Posted by: Joe Sitter
E-mail: joesitter2@qwest.net
Message Posted:

We have a 150 KVP Magnaflux portable x-ray system designed to run at 150 KVP (max) @ 7.9 mA (max). The prior owner stored the system in a damp location for so long that the hrdroscopic Be window developed a vacuum leak. The tube is now vented arcing over at 29 KV. Does anyone know where I may find a replacement for this tube? I will be sending it to a lab for an estimate on a rebuild job but that may cost more than the whole system is worth.
It is a water cooled, grounded W anode, metal-ceramic, 1.5mm focus tube with Be window. I have a digital photo of it with carefully measured dimensions drawn onto the picture if you think you can help.
Thx. Joe Sitter.

Follow Ups:

Post a Follow-up:


Message to Post:


1999-2001 Sunlit Technology Co., Ltd. All rights reserved.