Used Machinery/Equipment
- for metalworking

Home
Manufacturing Community
Electrical and Electronic Community
Site Map
Contact Webmaster

[ Post Message ] [ View Archives ]

For providing a better service and improving the interaction between users, we have upgraded our forum system. Please click here to go to new listing/matching system.


Absolute Auction 1/29/00 Near Nashville TN [Sell]01/14/00
Machinery and Equipment at Absolute Auction on 1/29/00 in Hendersonville, TN. For details please visit http://www.actionhomes.com/auctionteam/ohem.htm or call Bob Stanfield, Action Auction co. Toll Free 1-877-587-5800 TN Lic. 2495
Name: Bob Stanfield TN
Homepage: http://www.actionhomes.com/auctionteam/ohem.htm

Wire EDM [Sell]01/14/00
Sodick 4-Axis CNC Wire EDM. Model 1W, 1984 Excellent condition. Servo-packs overhauled @ New water pump. Have all documentation and manuals. Call (719) 268-1779 for more info. Asking $24,000. 220V 3-phase converter also available.
Name: Thomas Mendel Colorado
Homepage: http://

we needed die cast [Buy]01/14/00
Fakhari water pump.mfg R.10.F NO15 - FIAT .St - EKBATAN .Town - AZADI .Sq - TEHRAN - IRAN Fax NO : 0098 - 21 - 4659218 Email:pumpfakhari@rahavard.net Hello With greeting New Year Our company (Fakhari water pump manufacturing factory) is a special factory for manufacturing water pumps of different heavy and light vehicles. We mean buy one die casting machine for foundry aluminum ,lead , with under specification: 1- clamping force 250 ton 2- cold chamber model after 1980 or new , 3- third phase pressure in during injectionn 4- environment temperature working 0 to 35 degree C please send us: 1. Payment term 2. full specification (catalog) and pictures of machine 3. delivery time 4. shipment term 5. machine made in which country and make year. we await your reply tank you very much Rashid Fakhari
Name: Mahnam Fakhari Iran
Homepage: http://

On-Line Industrail Equipment Auction [Sell]01/13/00
Does not hurt to check it out
Name: Barry Illinois
Homepage: http://www.auction-now.com

An Easier Way [Sell]01/12/00
Here's an easier way to buy and sell metalworking equipment: www.equipp.com. Check us out!
Name: T. Ton CA
Homepage: http://www.equipp.com

FREE Shaper! [Sell]01/12/00
I have a Potter & Johnson shaper with a 15" stroke. It's in real nice cond. and needs nothing. I will GIVE it to a good home. I don't have the room for it and will have to junk it if I can't find a taker soon. It's under power and you can see it run if you want. Please email me if interested.
Name: Duane RI
Homepage: http://

Machines for Sale [Sell]01/11/00
I have 1 week left to sale a Excello mill and Monarch lathe Both with tooling both in very good condition go to home page and look for these machines call 412/243-8060
Name: Louie nichol pa
Homepage: http://www.m7l.com

Searching for metal packaging machinery or wanting to sell machinery [Sell]01/11/00
Are you interested in receiving NEW CONTACTS in the market to sell your equipment to or buy your equipment from. DO NOT LOOK ANY FURTHER. The Asset Redeployment System provides those new contacts FOR FREE!!! Total FREE online service for the Metal Packaging Industry! For more information please contact us.
Name: Asset Redeployment System The Netherlands
Homepage: http://www.asset-redeployment.com

Electro-Arc Tap Disintegrator [Sell]01/10/00
ELECTRO-ARC EDM Tap Disintegrator w/power donwnfeed Remove Broken Taps & Drills from expensive castings without damage to the casting. completely overhauled. MODEL: 2-DBQT S/N: 6597 NEW 1981 For more information see http://www.escape.ca/~intek/electro.htm#ELECTRO-ARC Price reduced Tel Al Inness 204-253-1572
Name: Alan Inness Canada
Homepage: http://escape.ca/~intek

WE BUY YOUR SURPLUS MACHINERY [Buy]01/09/00
WE BUY YOUR MACHINERY OR SELL ON CONSIGNMENT FOR 15% OF SALE PRICE, THOUSANDS OF CONTACTS, CALL US TODAY 770-719-9371
Name: joe chida ga
Homepage: http://

FS : Bridgeport, BR2J, Turret Miller w/pwr feed [Sell]01/08/00
Bridgeport Model BR2J, Series 1, Turret Miller (1987). Options included : Power Feed, 120v to 240v three phase converter. Very low hours, used only a few times as a hobby. Located near Yosemite National Park. Will ship upto 500 miles but prefer buyer to arrange for all shipping. Pictures available via email. Appraised at $5900.00
Name: Kevin Moore CA
Homepage: http://

Gilman Precision Lathe [Buy]01/04/00
I'm looking for a cross slide and other accessories, manual, and/or literature for a small Gilman instrument lathe which was manufactured in the late 30s. It has about a 5" swing and takes 10mm collets.
Name: Tim Manning TX
Homepage: http://

Want to buy CNC angle and/or beam fabrication line [Buy]01/03/00
Want to buy CNC fabrication line for angles and flats, capacity to ANG 6 X 6 X 1/2". Will consider machines that do channels and beams as well. ADDISON Corporation FAX (541)389-9668 voice (541)388-1329
Name: Jim Tyvand OR
Homepage: http://www.bendnet.com

Flame Metalizer for sale [Sell]01/02/00
Older model Mogulelectric flame metalizer, electric drive wire motor, uses acetylene/oxygen/compressed air. Comes with a high volume air/water seperator, caps & tips (I believe some will need to be rebuilt, some appear good. I don't have much experience with this eqpt.) Original flowmeter is broken, otherwise all original equipment is there. Replacement cost for this eqpt is around $16,000- make an offer.
Name: Brian Gilbert TN
Homepage: http://

MONARCH 10EE Lathe [Sell]01/01/00
Monarch 10EE comes with 3jaw chuck taper attach/DC verispeed drive 1948 model/quickchange tooling/2J sped chuck and colletts very nice lathe PH.412/243-8060 my web site is www.m7l.com I have this listed on EBAY
Name: louie pa
Homepage: http://cgi.ebay.com/aw-cgi/eBay...

EXCELLO MILL +VISE+DRO'S+TOOLING [Sell]01/01/00
VERY CLEAN MILL LIKE NEW has everything you need to start new DRO'S /newer colletts (R-8) some tooling/vise I have this listed on EBAY MY web site is www.m7l.com PH. 412/243-8060
Name: louie pa
Homepage: http://http://cgi.ebay.com/aw-cgi/eBay...

Bridgeport Mill wanted [Sell]12/31/99
Looking for a used Bridgeport mill near Boise Idaho. Variable speed desirable, but not necessary. I'm not interested in anything I have to ship or that I can't easily inspect. No junk, please.
Name: Leonard Stearns Idaho
Homepage: http://

Weldment Positioner [Buy]12/31/99
Hello. I'm looking for a rotary positioner that tilts, and lowers up and down smoothly. I'm a factory welder who does welded steel sculptures in my own comercial building next to our home. I'm always looking for interesting unpainted scrap parts for my art too. Check out my web site.
Name: Gary Kandziora WI
Homepage: http://fp.execpc.com/kandzior

For Sale Emco Benchtop CNC Lathe [Sell]12/30/99
For Sale: Small Benchtop CNC lathe. For full info and pictures see the following site.
Name: Robert Pa.
Homepage: http://members.aol.com/amts98/index.htm

South Bend Lathe 16/24 riser blocks [Buy]12/28/99
Wanted: South Bend Lathe 16/24 riser block set. Set would be for a South Bend 16" lathe to convert it to a 24" lathe. A full set is a riser block for the headstock, compound, tailstock and a gear train extension. Parts are also welcome.
Name: William E. Williams PA
Homepage: http://

Lathes/Mills and tooling for sale [Sell]12/28/99
I am saleing all my shop equipment everything must go,lots os bp parts see gstuff on ebay 412/243-8060 to see most of the machines PS:all the SB's except 1 are gone the rockwell mill is sold
Name: Lous shop pa
Homepage: http://www.m7l.com

Levin, Bridgeport, South Bend FS [Sell]12/28/99
Levin turret lathe, well tooled, 9x42 VS Bridgeport w/travdials, well tooled, 10x48 South Bend lathe See web page for pics, details, prices.
Name: Jon Anderson Calif
Homepage: http://www.prototype-design.com/garagesale.htm

Precision Pi Tape For Sale [Sell]12/28/99
For sale on ebay, Pi tape. Steel measuring tape calibrated to read diameter when wrapped around object. Ideal for measuring diameters 2" to 12", for machinists, welders, etc. Accurate to 0.001 in. Vernier reading. Mint condition. Ebay number 225190076. Auction ends 1-2-00 at 2:51 p.m. PST.
Name: Don Shenbarger Illinois
Homepage: http://cgi.ebay.com/aw-cgi/eBay...

Want to buy Tinsmithing Tools [Buy]12/28/99
I am a looking for used tinsmithing tools at reasonable prices for my hobby. Tinsmithing stakes, rotary machines, ring and circle shear, etc. Please email with description, price. Thanks, Jim English 704-283-5988
Name: Jim English NC
Homepage: http://

Urgent Clearance - Chucking Auto's [Sell]12/27/99
I urgently need to sell 2 off Pittler Pidofat 250 (10") Twin Spindle Chucking Auto's. Any offer considered Photo's & Spec's available
Name: Richard Green England
Homepage: http://members.aol.com/ejog/ejog.htm

Milltronics Partner 4 knee mill [Sell]12/21/99
Manufactured in 1992 the partner4 has a Centurion 5 controler with a renishaw digitizer. Price is $16,500 with the tooling. Located in San Jose California
Name: Daniel H Shumer California
Homepage: http://

south bend lathe parts [Buy]12/19/99
south bend lathe parts 860 589 4795
Name: babin ct
Homepage: http://

Acu-Rite Digital readouts [Sell]12/19/99
I'm an independent dealer of Acu-Rite Digital Readouts and can sell direct to you for less. I have installed over 800 complete systems on all kinds of machines. I also repair Acu-Rite and most other brands. If I can help Please call or email josephinmatthew@webtv.net days 804-241-0185 nights after 7:00 804-725-4629 Joe Robichaud
Name: Joseph Robichaud VA USA
Homepage: http://

5 HP DC Drive [Buy]12/18/99
We need a 5 hp dc drive complete. 240 vdc armature, 120 vdc field, with field weakening.
Name: Claude Martin Arizona
Homepage: http://

Software for gear hobbing [Sell]12/18/99
Software to find index and feed gear trains to cut helical gears on manual gear hobbing machines.
Name: David Malphrus Georgia
Homepage: http://home.sprynet.com/~dmalphrus/tools/changegearfinders.htm

Escomatic Wanted [Buy]12/16/99
Hello, We are looking for an older Escomatic (screw machine) wire machine that may be gathering dust. Thanks.
Name: William Carlyle CA
Homepage: http://net-sales-class-ads.com

For Sale: Johnson gas forge furnace [Sell]12/16/99
$550 or interesting trade Johnson Gas forge furnace (GREEN COLOR) Location: Greensboro, NC Model: 122E S/N : 525NAT fuel: natural gas BTU: 200,000 chamber: rectangular fire brick chamber size: L=13.5 W=4.25, D=7.0 inches top of unit is all firebrick: 18.5 x 22.5 inches overall height: 37 inches overall width: 14 inches Lid: 6.5 x 22.25 inches controls: gas on/off, air on/off ignition: electric (high voltage) accessories included: tongs, installation manual, maintenence manual, listing of repair parts & part numbers. reply to: g_buster@hotmail.com posted: 12/16/99
Name: Steve Gent NC
Homepage: http://

Searching for metal packaging machinery or wanting to sell machinery [Sell]12/16/99
Are you interested in receiving NEW CONTACTS in the market to sell your equipment to or buy your equipment from. DO NOT LOOK ANY FURTHER. The Asset Redeployment System provides those new contacts FOR FREE!!! Total FREE online service for the Metal Packaging Industry! For more information please contact us.
Name: Asset Redeployment System The Netherlands
Homepage: http://www.asset-redeployment.com

General Radio Strobotac Reflector [Buy]12/15/99
Looking for either a General Radio Strobotac Model 1531-AB reflector or a dead complete unit I can buy cheap. Thanks---Jay
Name: Jay Arkansas
Homepage: http://

1908 Popular Mechanics Shop Notes annual [Sell]12/11/99
A whole year's worth of Shop Notes bound in one volume, #4, 1908 Fair condition, binding still good. See a picture at: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll? ViewItem&item=213983296
Name: Dan Bollinger IN
Homepage: http://

Used Machine Tools for Sale [Sell]12/08/99
We currently have a selection of CNC and CONVENTIONAL MACHINE TOOLS immediately available for sale. For more details, visit our web site or request a list of available equipment.
Name: Christine Danielou England
Homepage: http://www.henrybutcher.com

magee, erco, lennox, parts/ tooling wanted [Buy]12/06/99
looking for any tooling for erco hd flanger, lennox metal master, and magee edge wiring machine(#10), anything considered,Jeff
Name: jef booze okla
Homepage: http://www.peddlersrestorations.com

Harig Surface Grinder for Sale [Sell]12/04/99
Harig Surface Grinder Super 612 for sale. Like new. Call Dan Willis at Supreme Tool @ Manufacturing 954-989-7399 or E-Mail.
Name: Richard Perry Florida
Homepage: http://

FS:Machine shop+lots of machine parts [Sell]12/03/99
Machines in excello mill/monarch lathe tons of tooling and machine
Name: Louie Nichol pa
Homepage: http://www.m7l.com

craftsmen 4" metal lathe [Buy]11/29/99
I'm looking to purchase some parts for this hobby lathe.I need a set of jaw adjusting screws 1/2"12NC with allen or square holes.Also a 4" three jaw chuck.
Name: Bruce Dilling Ont.Canada
Homepage: http://

Shop for sale [Sell]11/29/99
Complete machine shop for sale. CNC lathe and mills, saws, grinders, mills and lathes, all must go.
Name: Lou Graveline Arizona
Homepage: http://

40x80 Yoneda CNC Vert Mill @ $50000 [Sell]11/28/99
We have available a Yoneda CNC Vert Mill which was retrofitted 3 years ago with Heidenhain 407 CNC Control. It is in very good condition. Price $50,000, we'd consider trades! PH (616) 453-3831
Name: Doug Watkoski Michigan
Homepage: http://

Wanted: Steady rest for Monarch [Buy]11/24/99
I am looking for a steady rest to fit a Monarch 12CK 14 x 30 lathe. Contact David at (785)673-4267 or email hiflier@ruraltel.net
Name: David Chapman Kansas
Homepage: http://

Deckel FP1 parts [Sell]11/24/99
Deckel FP1 (will fit FP2 too) dividinghead complete with bar with tilting possibility and the long bar with endsupport in good cond. $1300 (shippingcost $180 )
Name: Anders Borg Sweden
Homepage: http://

Jacobs lathe spindle collet chuck [Buy]11/20/99
I have a jacobs lathe spindle collet chuck (model 91)for an A-6 lathe spindle (uses rubberflex collets). I wish to trade same for a jacobs collet chuck that has a L00 spindle.
Name: greg logan oklahoma
Homepage: http://

metal equipmet [Buy]11/19/99
Yoder or any power hammer used in sheet metal fabrication, also, pullmax machines, louvre punch, any high end metal equipment
Name: jeff okla
Homepage: http://www.peddlersrestorations.com

want to buy 14" to 18" lathe with 50" to 70" bed [Buy]11/19/99
Would loke to buy 14" to 18" lathe with 50"to 70" bed in good condition, reasonably priced. vanorden@prodigy.net
Name: scott vanorden idaho
Homepage: http://

Screw Machines for sale/ Portland area [Sell]11/17/99
Cam and Pegboard auto. screw machines 2 Traub 4 slide A-25 screw machines, bar feeds, access., tooling & spares $5500. 2 Logan Mdl. 450 Electrimatic auto turret lathes plus loads of spares $6500 2 Turner drive B&S screw machines-00 & 0G plus spares $2500 Rockwell Mdl. 21-120 V.S. horizontal mill 60-2400 rpm #30 $1550 Clausing V.S. drill press Mdl. 1688 15", floor, $675 35,000 wing nuts (unplated) 5/16 & 3/8 UNC in original wood kegs $450 Bob (503)557-1599 Portland, Oregon
Name: Bob @ Wayback Machine Oregon
Homepage: http://

SCANNER-DEFECTOSCOPE FOR LOW-ALLOYED STELL CONSTRUCTIONS & STRUCTURES The series 'COMPLEX-2' [Sell]11/17/99
NEW! The electromagnetic scanner-detector of defects "Complex-2" efficiently detect evolving and being conceived defects, for example, impurital inclusions (slag and others), entirety infractions (pores, cracks and others), dangerous changing of a structure of metal (stress-corrosion, domains of the remaining thermoplastic deformation etc.) in engineering designs made of low-alloyed or low-carbon steel. The method used in these instruments is based on the dependency of magnetic characteristics of metals from mechanical stresses in them that in the field of the berth or of the presence of defects is accompanied by the effect of concentration of mechanical stresses. More: http://www.td.ru/dimenstest/engl/device/cmx.html Best regards! Valentin S. Zhukov Institute "DIMENStest" St.-Petersburg, Russia dimenstest@scientist.com
Name: Valentin S. Zhukov Saint-Petersburg, RUSSIA
Homepage: http://www.td.ru/dimenstest/engl/device/cmx.html

jacobs lathe spindle collet chuck [Sell]11/16/99
I have a Jacobs lathe spindle collet chuck for an A-6 lathe spindle (this the series 91 that utilizes rubberflex collets). My lathe has a L00 spindle; and I wish to trade the A-6 collet chuck for a L00 collet chuck. The A-6 chuck is in very good condition. Anyone interested in this trade can email me or call me at my day (work) number: (405) 736-5509. Thanks, Greg
Name: greg logan oklahoma
Homepage: http://

Bridgeman Machinery Sales, Inc. [Sell]11/16/99
Recently updated. Plenty to look through at the web site. * full descriptions * pictures * and prices --- Lathes Mills Grinders -- we BUY and SELL so drop us a line! :)
Name: Paul Michigan
Homepage: http://www.bridgemanmachinery.com

L@@K here before Buying / Selling machinery [Sell]11/14/99
We are metalworking machine tool brokers. If you're sick of dealing with the usual "dealers" out there...getting offered 10% of what your machine's worth, give us a call! What we do is bring the buyer and seller together. We charge a set commission rate on the FINAL selling price of your piece. They write the check to you, and you write ours to us. Everything is up front!!! WE DO MORE DEALS. Nu Tek Sales PO Box 141103 Grand Rapids, MI 49514 (616) 453-3831 FAX (616) 453-7352
Name: Doug Watkoski MI
Homepage: http://

Micro Lathe [Buy]11/13/99
Hi, looking to purchase a Micro lathe and attachments, accessories in good condition.
Name: Ivan Australia
Homepage:

Aciera F1 and F3 milling machine [Sell]11/11/99
I'm looking for accessories for the above milling machines. I would be happy to buy a complete machine if it came with lots of accessories. Also I would like a workshop manual for the F3 and sales catologues and prices for the 1950's and 60's for both machines.
Name: Martin Hudson England
Homepage: http://

Surplus Presses/Fabricating Eqpt [Sell]11/10/99
4- Mech C-frames 50-100 tons. Incl: Bliss, D&K, and L&J. 1- CNC Wiedemann Turret Press 1- Pullmax Circle Shear 1- 8' Air Brake/ Fanudo/ Holes to .250"t & Many Multi-Drill, Gang Tapping Units. All above in good cond,in prod,under power.(Indiana) 219-255-9689. Jay-MfgEngr
Name: WeldedProductsCo Indiana
Homepage: http://

Boxford CUD 5"x24" lathe for sale [Sell]11/10/99
Boxford CUD lathe, 5"x24" on makers cabinet, 4-way toolpost, face and catch plates, full set of change wheels, imperial lead screw, dual metric/imp dials. View near Warwick in UK.
Name: Gary Wooding UK
Homepage: http://

Pliers [Buy]11/09/99
Interested in purchasing very large quantity (1000) of 5" Needle Nose, and Flat Nose pliers. Price cannot exceed $1.00 per pliers. Thanks. RW
Name: Ray W Missouri
Homepage: http://

1978 Shizuka St-n CNC Bandit Level 2 [Sell]11/07/99
For Sale By Owner One 1978 Shizuka STN Bandit level 2 with holders. $5000. firm. Newbury park, Ventua County Ca 91320
Name: Mohammad Khan Ca .
Homepage: http://

Wire Mesh machine for small wires 0.5mm upto 1.5mm [Buy]11/05/99
We are looking for second hand a wire mesh machine that can make rolls of wire mesh in lengths of 50 to 60 metres in 0.5mm smallest wire upto 1.5mm The spacing of the wires is 100mm x 100mm normally
Name: Keith Davies Hong Kong S.A.R China. +852
Homepage: http://www.golik.com

Used EDM Equipment [Buy]11/04/99
I am looking for EDM equipment with obsolete or non-functioning power supplies.
Name: M. Brenner WI
Homepage: http://

FS: Pro-Tools Roll Cage Tubing Bender [Sell]11/03/99
Check out my tubing bender auction, currently its only $250 with no reserve. Good luck!
Name: Mike Cole MD
Homepage: http://cgi.ebay.com/aw-cgi/eBay...

Deckel Parts Wanted [Buy]11/03/99
I am looking for used Deckel parts for an FP1 or fp2 Deckel: Slotting head, long reach vertical head(40 taper), 40 taper collets (for Deckel!) Wohlhaupter boring head model UPA3 or UPA4 with deckel 40 taper shank. Phone: 415-924-9022 or e-mail any response to :alfagta@pacbell.net any condition considered.....other Deckel parts considered!
Name: Ross Cummings Ca
Homepage: http://

Craftsman Lathe Motor Pulley WANTED [Buy]11/01/99
Wanted: Craftsman 12 inch lathe 2 step motor pulley.
Name: Don WA
Homepage: http://

Looking for a crop shear for our existing slitting line [Buy]10/31/99
I am going to buy a crop shear for our existing slitting line in Hamilton, Ontario. The shear capacity we need is to handle cold rolled steel strip and galvanized steel strip with Gauge: 0.0059”-0.058” Width: 60” I could be reached at 905-858-8583 or by e-mail if you got any new or used shear to sell.
Name: Michael Chu Ontario, Canada
Homepage: http://

Wanted: South Bend Lathe 16/24 riser blocks [Sell]10/30/99
Wanted: South Bend Lathe 16/24 riser block set. Set would be for a South Bend 16" lathe to convert it to a 24" lathe. A full set is a riser block for the headstock, compound, tailstock and a gear train extension. Parts are also welcome.
Name: William E. Williams PA
Homepage: http://

Rockwell 2 speed lathe parts ect. [Sell]10/28/99
Hi I have just purchaced a rockwell 2 speed metal lathe 10"swing by 26" bed..I am looking for any and all information on this lathe..whether there are thread turning attachments..a manual available....and any other info you might have.. Thanks Roy
Name: Roy Lane Ct
Homepage: http://

tool holder for jet lathe [Buy]10/27/99
looking for 4 way tool post (at a reasonable price) that comes with BD920N jet lathe. need xtra one to save time with tool changes. e-mail me . thanks in advance.....dave
Name: dave florida usa
Homepage: http://

We buy new-used-rebuilt and even junk equipment [Buy]10/27/99
We buy valves,pumps,a/c and refrig. compressors,electric motors,starters, breakers,gear reducers,bearings,pipe and fittings,vacuum pumps,hydraulic pumps and motors,diesel motors,allison transmission All types of equipment.901-836-0420
Name: Malcolm Moore Tennessee
Homepage: http://

For Sale--Miller Econotig Welding Machine [Sell]10/24/99
This is a current production machine in like new condition, used to do light aluminum welding in my shop. Price is for the machine, TIG torch, stinger, foot control, and power cable, $1000.00. Contact me at 505/672-9423 or e-mail.
Name: Ron Hyer NM
Homepage: http://

Looking for small automatic lathe suitable to make small production runs from bar, up to 1/2" dia. [Buy]10/22/99
Need to find a small used barfed lathe for making small aluminum parts up to 1/2" in dia. and up to 2 inches long. Will be making production runs in the 1000 pc. range. Reasonably priced
Name: Eric Price IL
Homepage: http://

Lathe Manual [Buy]10/21/99
I need a photocopy or original operator's/parts/maintenance manual for a "Clover" 22/33, MERLI-VOGHERA ser#5943 47. It's an older machine with 7-step (?) quick change. Correct manual only.
Name: John L. Talbot Texas
Homepage: http://

Rubber Mold casting equipment for sale [Sell]10/19/99
Two Frank Pertot Air Cast Spinners(Baldor 1/3 HP motor, 1725RPM, 115 volts-1981); 1 Pertot Mold Maker(#2514)110 volts) 1 Melting Furnace(PartlowModel 250) wit temp. control 1 Tumbler Machine(Pertot ModelJ-R PN 51, serial # 4013300-3A) Also misc ladles and molds.Original cost for all was $13,000. Will accept best offer over $4000.Equipment is in Atlanta, Georgia. Phone: 770-454-7661, extension 213 or e-mail david@fashionvictim.com
Name: David McWilliams Georgia
Homepage: http://

Multi-Mig Welder [Sell]10/19/99
If anyone is interested, please see my ad for this welder on ebay, Thanks
Name: Matt D New York
Homepage: http://cgi.ebay.com/aw-cgi/eBay...

Complete Shop [Sell]10/18/99
Deckel FPl with dividing head, 2 tables, DRO, many extras, Monarch 10EE w/3 chucks many extras, band saw, die filer, tool grinder, arbor press,Lista Swiss steel tool cabinet, hundreds of end mills, reamers, height gage, precision 24" shear. Many Starret instruments. Also a stock of brass and aluminum for model making. I am an amateur and have been making model locomotives and steam engines for fun, hence you will realize this equipment has seen little use. Located in Akron, Ohio. Telephone (330)867-1111.
Name: Irving J. Olson OH
Homepage: http://

Metal Machinery Auctions [Sell]10/17/99
We are running our first online metal machine auction and we would be very interested to hear your views on how we are doing. The internet is the best way to distribute auction information, but we would like to know what our clients think about on-line auctions for industrial equipment.
Name: Devin Rogers MA
Homepage: http://www.assetline.com

Lathe parts [Buy]10/15/99
Hey there! just bought a lathe in great condition. A south bend 10" unfortunately it has no accessories, i am looking for a taper attachment, indexer, micro stop, collets etc. the more the better thanks Aaron
Name: Aaron Wa
Homepage: http://

Used CNC Fabrication Machinery [Bizop]10/14/99
Our Company, Joe Clar & Sons, Inc buys and sells used cnc and manual fabrication machinery.Located in Oakland CA, we have a warehouse full of prime Amada cnc turrets, brakes and shears. We also do appraisals of all industrial machine tools. We carry our own financing through CAM Financial Resource.
Name: Mark Clar, Vice President California
Homepage: http://jclarmachinery.com

Hardinge tool room lathe [Buy]10/11/99
I am seriously seeking a clean, late model Hardinge tool room lathe, the HLV-DR model with inch-metric gearbox and factory installed digital readouts. Any leads or suggestions would be greatly appreciated. I am located in New Jersey, am willing to travel to see a good condition lathe.
Name: David M. Munro NJ
Homepage: http://

Searching for metal packaging machinery or wanting to sell machinery [Sell]10/11/99
Hello there... Always wanted to use the world as your own inventory of your metal packaging equipment, whenever you want, wherever you are. Now you never have to look any further than your computer: Asset Redeployment System! We are a database unbiased internet matching service. You can visit us at: www.asset-redeployment.com. Or you can send us an e-mail at: info@asset-redeployment.com. We hope you will find the time to study our service, experience the ease of it's use and judge it as an additional instrument for the industry.
Name: Asset Redeployment System Netherlands
Homepage: http://www.asset-redeployment.com

looking for a lathe [Buy]10/05/99
Je cherche un petit tour à métal (12x36 ou moins) usagé ou neuf, faites moi une offre.
Name: Jean-Philippe Canada-Quebec
Homepage: http://

AMMCO 6" shaper [Buy]10/05/99
I'd like to buy a photo copy of manual for the above. Also I need a nice small vise for holding work on the above.
Name: Gerry Brazil MI
Homepage: http://

Wanted: AccuRite Microscale. [Sell]10/04/99
I'm looking for an AccuRite microscale about 8-10 inches long. Any dealers out there discount this kind of equipment?
Name: Len Stearns Idaho
Homepage: http://

2" Hertal facemill and inserts for sale [Sell]10/01/99
New 2" Hertal Facemill for sale, with 30 inserts(for alum only). E mail blownram@yahoo.com. $150.00 Free ship....
Name: Bob Tuttle Florida
Homepage: http://

Want to Buy Bar Straightener [Buy]10/01/99
Hi. Client currently has Medart #3 bar peeler, and is seeking corresponding 2-roll straightener, to accomodate 3- to 4-inch stainless bar stock, up to 22 feet long. Thank you very much!
Name: Rich Grise California, USA
Homepage: http://entheosengineering.com

View archives

Messages from 23 July - 30 September 1999